APEXI POWER FC COMMANDER FOR TOYOTA SKYLINE ER34 RB25DET 415-A030

All models except for A/T are compatible with M/T only.
Note: *1 When using the Power FC alone, the initial settings must be changed depending on the specifications of the genuine cleaner and air flow.
(For Nissan vehicles, the initial settings (without the Boost Control Kit) are required when using the Power FC alone.)
Note: *2 When using the Boost Control Kit, some wiring of the genuine solenoid valve may need to be modified.
Note: *3 The Boost Control Kit is required only when using the above boost levels.
Note: *4 The Boost Control Kit is not required for normal turbines.
Note: *5 When using the FC Commander, a commander extension cable (415-XA02 3,000 excl. tax L=3m) is required.
Note: *6 Two pressure sensors (499-X001), a D-Jetro P/S harness (415-XA04), and two 4 nipples (499-A019) are required. Note) *7 FD3S genuine intake air temperature sensor (N3A1 18 845) and D-Jetro intake air temperature harness (415-XA03) are required.
Note) *8 Wiring modification is required to install the boost control kit.
Note) *9 Pressure sensor (499-X001) and 5P sensor harness (49C-A004) are required.
Note) *10 Cannot be installed on GT-A. Cannot be installed on vehicles equipped with the manufacturer’s option MMCS (MMCS: Multi-Communication)Note) *13 When using the boost control kit at the same time, there is no need to purchase *9 separately.
Note) *14 Pressure sensor (499-X001) and 3P sensor harness (49C-A002) are required.
Note) *15 When using the boost control kit at the same time, there is no need to purchase *14 separately.